Monday, July 16, 2012

Common Motor Types and Typical Applications

Common Motor Types and
Typical Applications

Alternating Current Designs:

Single Phase * Rigid Base Mounted * Capacitor Start * Totally Enclosed Fan Cooled (TEFC) & Totally Enclosed Non-Vent (TENV)

General purpose including compressors, pumps, fans, farm equipment, Conveyors, material handling equipment and machine tools.

Single Phase * Rigid Base Mounted * Capacitor Start * Open Drip Proof (ODP)
General purpose including compressors, pumps, conveyors, fans, machine tools and air conditioning units - usually inside or where protected from weather, dust and contaminants.

Three Phase * Rigid Base Mounted * TEFC
General purpose including pumps, compressors, fans, conveyors, machine tools and other applications where three-phase power is available.

Three Phase * Rigid Base Mounted * ODP
General purpose including pumps, compressors, machine tools, conveyors, blowers, fans and other applications requiring three-phase power, usually inside or where protected from weather, dust and contaminants.

Single Phase * NEMA C Face Less Base * Capacitor Start * TEFC & TENV
Pumps, fans, conveyors, machine tools and gear reducers.

Single Phase * NEMA C Face Less Base * Capacitor Start * ODP
Fans, blowers, compressors, tools and speed reducers.

Three Phase * NEMA C Face Less Base * TEFC & TENV
Fans, blowers, compressors, tools and speed reducers where three-phase power is suitable.

Three Phase * NEMA C Face Less Base * ODP
Fans, blowers, compressors, tools and speed reducers.


Wash-Thru and Multiguard Motors
Used in applications involving moisture, vibration, dust and some chemical contact. The motor’s windings are impregnated and encapsulated in a thermosetting that protects them from contaminants for long motor life.

Automotive Duty Motors
Suited for a wide variety of tough applications found in automotive manufacturing facilities and other industries utilizing U-Frame motors. Meets or exceeds General Motors GM-7EH and –7EQ, Ford EM1 and Chrysler NPEM-100 specifications.

Crusher Duty Motors
Ideally suited for size reduction equipment including rock crushers and pulverizers and other uses the aggregate and construction industries. They are designed for belted (radial) loads only utilizing roller bearings on the Drive-end side of the motor.

Washdown-Duty * Single & Three Phase * TENV & TEFC

Extended life in applications requiring regular hose-downs with
cleaning solutions, as in food processing and for applications in wet, high humidity environments. Also available in direct current designs.

Explosion Proof * Single & Three Phase * TENV & TEFC
Designed and listed for application in hazardous environments having certain explosive gases or materials present on equipment, such as blowers, pumps, agitators or mixers.

Chemical Service Motors * Rigid Base
Petrochemical plants, foundries, pulp and paper plants, waste management facilities, chemical plants, tropical climates and other processing industry applications requiring protection against corrosion caused by severe environmental operating conditions.

Brakemotors * Single & Three Phase
Machine tools, hoists, conveyors, door operators, speed reducers, valves, etc., when stop and hold performance is required when power is removed from the motor by the use of a spring-set friction brake.

Resilient Mounted * Single & Three Phase * Moderate Starting
Torques
General purpose applications where quiet operation is preferred for fan and blower service.

Resilient Mounted * Single & Three Phase * Two Speed * Two Winding * Variable Torque:
Belted or fan-on-shaft applications.

Rigid Mounted * Totally Enclosed Air Over (TEAO) * Single & Three Phase
Dust-tight motors for shaft-mounted or belt-driven fans. The motor
depends upon the fan’s airflow to cool itself.

HVAC Blower Motors * Three Phase * Automatic Reset Overload Protector * Resilient Base * ODP

Heating, ventilating and air conditioning applications requiring moderate
starting torque and thermal protection.
Condenser Fan Motors * Three Phase * Belly Band Mount * ODP
For operating vertical shaft-up on condenser fan, air-over applications, such as rooftop air conditioning units.

Two Speed * Three Phase * Variable Torque
Fans, blowers and centrifugal pumps. Variable torque motors have horsepower ratings that vary as the square of the speed, while torque varies directly with the speed.

Two Speed * Three Phase * Constant Torque
Mixers, compressors, conveyors, printing presses, extractors, feeders and laundry machines. Constant torque motors are capable of developing the same torque for all speeds. Their horsepower ratings vary directly with the speed.

Two Speed * Three Phase * Constant Horsepower
Machine tools, such as drills, lathes, punch presses and milling
machines. Constant horsepower motors develop the same horsepower at all operating speeds, and the torque varies inversely with the speed.

Jet Pump Motors * Single & Three Phase
Residential and industrial pumps, plus swimming pool pumps. The pump impeller is mounted to the motor shaft.

JM Pump Motors * Single & Three Phase
Continuous duty service on close-coupled pumps using NEMA JM
mounting provisions. Commonly used for circulating and transferring fluids in commercial and industrial water pumps.

Compressor Duty * Single & Three Phase
Air compressor, pump-fan and blower duty applications which require high breakdown torque and overload capacity matching air compressor loading characteristics.

Woodworking Motors * Single Phase * TEFC
High torques for saws, planers and similar woodworking equipment.

Instant Reversing Motors * Resilient Mount * Single Phase * ODP

Specially designed motors for use on instant-reversing parking gates, doors, slide gates or other moderate starting torque instant reversing application; capable of frequent reversing service.

Pressure Washer Pump Motors * Rigid Mount & Rigid Mount with NEMA C Face * Single Phase * ODP

Hot or cold pressure washers and steam cleaners.

IEC Metric Motors * Three Phase
For replacement on imported machined tools, textile machinery and other equipment having metric dimensioned motors. Also available in direct current designs.

Farm Duty * High Torque & Extra High Torque * Rigid Base Mount & C Face Less Base
Severe agricultural equipment applications requiring high torques under adverse operating conditions such as low temperatures.

Agricultural Fan Duty * Resilient & Rigid Base Mount * Single & Three Phase * TEAO
Dust-tight fan and blower duty motors for shaft-mounted or belt-driven fans. The motor depends upon the fan’s air flow to cool itself..

Feed-Auger Drive Motors * Single Phase
Dust-tight auger motors eliminate damage caused when the motor is overspeeded by an obstructed auger. Special flange mounts directly to the auger gear reducer.

Hatchery/Incubator Fan Motor * Band Mounted * Single Phase * TEAO
Replacement for use on poultry incubator fans. Includes extended through bolts for attaching farm shroud.

Feather Picker Motor * Rigid Mount * Three Phase * TEFC
Washdown-duty motor replaces the MEYN drive motor of a processing machine that removes feathers from poultry.

Milk Transfer Pump Motor * Rigid Base * Single Phase * TENV
Replacement in dairy milk pumps.

Grain Stirring Motors * Rigid Base * Single Phase * TEFC
Designed to operate inside agricultural storage bins for stirring grain, corn, and other agricultural products during the drying and storage process.

Irrigation Drive Motors * C Face Less Base * Three Phase * TEFC
For center pivot irrigation systems exposed to severe weather environments and operating conditions. Drives the tower that propels sprinklers in a circle around the well.

Elevator Motors
Submersible Hydraulic Elevator Pump Motors
Used in Elevator systems for applications in hydraulic passenger, service, freight and low-rise elevators.

Hydraulic Elevator Pump Motors
Used in Hydraulic pump passenger, service, freight and dumbwaiter low rise elevators

VVVF (Variable Voltage Variable Frequency) Traction Elevator Hoist Motors

Designed for Geared and Gearless Traction Elevators.
Direct Current Designs:

High-Voltage, SCR-Rated Brush-Type * Permanent Magnet Field * C Face With Removable Base * TEFC
Generally used for conveyors, machine tools, hoists or other applications requiring smooth, accurate adjustable-speed capabilities through the use of thyristor-based controls, often with dynamic braking and reversing also required. Usually direct-coupled to driven machinery, with the motor often additionally supported by a base for maximum rigidity. Such motors are also applicable where extremely high starting torque, or high intermittentduty running torques are needed, even if the application may not require adjustable speed.

High-Voltage, SCR-Rated Brush-Type * Permanent Magnet Field * Washdown-Duty Enhancements * C Face With Removable Base * TENV
Designed for extended life on food-processing machines or other highhumidity environments where adjustable speed is required.

Low-Voltage Brush-Type * Permanent Magnet Field * C Face With Removable Base * TENV
For installations operating from battery or solar power, or generatorsupplied low-voltage DC. One key application is a pump operating off a truck battery. Like high-voltage counterparts, low-voltage designs provide linear speed/torque characteristics over their entire speed range, as well as dynamic braking, easy reversing and high torque.

No comments: