Wednesday, September 3, 2014

Generators Brushless Conversions from carbon brushes to co-rotating diodes






Generators of older design are fitted to the then state of the art with brush-type exciter machines.
This is a more or vinous large perturbation term for your business that gives rise to repairs. Particularly unpleasant is the pollution of the machine by means of electrically conductive brush abrasion. In connection with the occurring cracks in the course of time insulation This represents an increased risk of damage winding.

To increase the permanent availability, we offer a conversion to co-rotating diodes (with removal of all carbon brushes) on.
In the future, thus also sets a lower maintenance, which reduces in principle to the bearing lubrication. 
Brush control- and exchange and cleaning measures for brush wear omitted.
Our mechanical workshop and testing we are able to carry out everything in our own factory and modernize your generator.
In older machines often confronted with the problem that only has the collector of the exciter machine due to wear and various edits insufficient fin height, so no further over speeding longer possible.
As an alternative to renewal of the collector therefore urges the conversion to a brushless excitation, combined with all the benefits of continued use, almost.
Generators of older design are fitted to the then state of the art with brush-type exciter machines.
This is a more or vinous large perturbation term for your business that gives rise to repairs. Particularly unpleasant is the pollution of the machine by means of electrically conductive brush abrasion. In connection with the occurring cracks in the course of time insulation This represents an increased risk of damage winding.
  
Post a Comment